NEW Radar Indoor

The new 24 V LED circuit board for flat light boxes with an overall depth of up to 40 mm for indoor installation is now available.

Advantages of the Radar Indoor:

• Homogeneous illumination thanks to powerful LEDs
• Very large radiation angle with 170° lenses
• Quick and easy installation: strip can be cut off the reel after each LED
• Cables are pushed into insulation displacement connectors; no soldering required
• Double-sided adhesive tape provided on the back of the strip
• Available in custom lengths or on 12 m reels
• Colour temperatures: 5,000 K or 6,500 K
• Maximum run length per power supply: 12 m

Radar Indoor - Data Sheet

Radar LED [Outdoor]

The hansen Radar-LED with converters and accessories is a highly flexible system for backlighting acrylic glass, banner fabric or similar translucent materials.

Its primary application is the illumination of large and flat illuminated bodies with a depth of 60 to 150 mm.

The key feature of the hansen Radar-LED is a special lens with a large radiation angle of approximately 160°. The lens spreads the light at a „flat“ angle leading to a more uniform light distribution on the backlit surface. This means that less LEDs are needed per unit surface area, and the installation effort is reduced due to the lower number of LEDs.

The hansen Radar-LEDs are operated in series connection with a constant LED current of 100 mA. This has the following benefits:

• Uniform brightness of the LEDs
• High system safety (terminals, cables)
• Overloading of the supply cable is not possible
• 22.5% less energy consumption than with 12 VDC
• Low operating current of the LEDs (well below the limit value) ensures a long lifetime

The hansen Radar-LED is available with white light and the following colour temperatures: 3,000 K, 4,000 K, 5,000 K and 6,500 K.The LED spacing, i.e. the length of the connecting cables between the individual LEDs is pre-determined by the manufacturer. The Radar-LED can be ordered with a spacing of 100, 150, 200 and 250 mm.The installation of the hansen Radar-LEDs inside the light box is easiest when the LEDs are mounted at the pre-determined spacing. In doing so, however, it must be taken into account that the desired uniformity and brightness of the illumination is achieved. If necessary, the LEDs can always be installed at a smaller spacing.

For further technical details and information please refer to the following links:

Radar-LED - Data Sheet
Radar-LED - Description
Radar-LED - Connection

Radar-LED - Flyer

TÜV-Certificate
EC Declaration of Confirmity